Table of Contents
Advertisement
Appendix
Chapter 2. Service Utility-Additional Instructions
• Setting Area position and rotation
The [35. 14*17 film character field position & rotation(Default):] is used to set positions of each area (0
and 1) and rotation so that the image is output in each size ([1417:], [1714:], [1843:], [0810:]).
The [36. 14*17 film character fields position & rotation(Specific MPMs):] is used to set the availability
of four types ([FC1:] to [FC4:]) of area position and area rotation for a specific MPM code.
For MPM codes that are not set in the [36. 14*17 film character fields position & rotation(Specific
MPMs):] , they are output in the normal format (top left-hand corner/no rotation for area 0, top right-
hand corner/no rotation for area1).
Position/Rotation Definition
0031 : 0123
An example of settings : )
[FC1 : ] ="0031 : 0123 1234 2345 3456 4567 5678 6789 789A"
Area 0
Area 0: Position (top left-hand corner), not rotated
Area 1: Position (bottom right-hand corner), 90 degree rotated
006-251-01
05.12.99 FM2442
MPM Code (can be set up to 8 codes)
1234
2345 3456
90 deg. rotation of area 1 (0: Not rotated, 1: Rotated)
Position of area 1
(0: Top left-hand corner, 1: Top right-hand corner,
2: Bottom left-hand corner, 3: Bottom right-hand corner)
90 deg. rotation of area 0 (0: Not rotated, 1: Rotated)
Position of area 0
(0: Top left-hand corner, 1: Top right-hand corner,
2: Bottom left-hand corner, 3: Bottom right-hand corner)
4567
5678
6789
FP4G0221.EPS
FP4G0222.EPS
FN-PS551 Service Manual
Appendix-36
789A
Appendix-36
Advertisement
Chapters
Table of Contents
