Checking Contents; Product Components - FujiFilm FN-PS551 Service Manual

Installation 2. Setting Up the Equipment
2.3

Checking Contents

Product Components

The FN-PS551 consists of the following components.
Component
Control unit
Printer I/F board E-I/F board
Printer I/F cable E-I/F cable
Other options
006-251-03
03.30.2000 FM2730
Name
DICOM protocol specifications
TOSHIBA protocol specifications
IPU specifications
E-I/F connector/converter cable
DICOM protocol software
TOSHIBA protocol software
IPU Specifications Software
DICOM protocol key registry
software
TOSHIBA protocol key registry
software
IPU Key Registry Software
PEM Key Registry Software
Power cords (EU specs)
Power cords (UK specs)
Q'ty Remarks
Select either one according to
1
specifications of installation site
(including the monitor)
1
(IPU specifications support
1
software ver. A03 or later)
1 to 2 Max. two
1 to 2 Max. two
1 to 2 Required when using existing
E-I/F cable (with normal-size
connectors at both ends)
1 Software for FN-PS551
application and DICOM
protocol key registry
1 Software for FN-PS551
application and TOSHIBA
protocol key registry
1 Software for FN-PS551
application and IPU key registry
(IPU specifications support
software ver. A03 or later)
1 Used to add DICOM protocol
1 Used to add TOSHIBA protocol
1 Used to add IPU function
(IPU specifications support
software ver. A03 or later)
1 Used to add PEM (Pattern
enhancement processing for
mammography) function for
IPU specifications (PEM function
support software ver. A04 or
later)
2 Separate cables for control
unit and monitor
2 Separate cables for control
unit and monitor
FN-PS551 Service Manual Installation-9
Installation-9
TP4B0005.EPS