Table of Contents
Advertisement
Maintenance 8. Software Installation
(10) Check that the all the items in the list are correct and press <Enter> key.
If not correct, repeat the setting procedure by referring to the explanation on
the screen.
→ The screen for selecting partitions to install appears.
NOTE
The illustration of the step (10) is an example for a 3.2 GB hard disk drive.
For a hard disk drive of over 6.4 GB, partition size for "C:" is displayed as
"2047 MB", however, for partitions after "D:", partitions and sizes displayed
vary depending on the capacity of the hard disk drive.
However, vacant capacity of partitions varies depending on usage status.
006-251-05
05.30.2001 FM3069
Maintenance-147
FN-PS551 Service Manual Maintenance-147
Advertisement
Chapters
Table of Contents
