FujiFilm FN-PS551 Service Manual page 310

Maintenance 11. Installing Software for GX260 Series Control Unit
Software Installation Flowchart
START
Remove Printer Interface Board
Install Windows XP
Install System Driver
Install Video Driver
Install Network Driver
Format D drive
Set System Startup Latency and
Task Bar Display
Install FN-PS551 Application and
Key Registry
Install Printer Interface Board
Set FN-PS551 Application Display
Language
END
NOTE
When reinstalling only the application software, perform "Install FN-PS551
Application and Key Registry" and "Set FN-PS551 Application Display
Language".
006-251-07
10.28.2002 FM3487
Refer to "11.1 Installing Windows XP"
Refer to "11.2 Installing the Various Types of
Driver Software"
Refer to "11.2 Installing the Various Types of
Driver Software"
Refer to "11.2 Installing the Various Types of
Driver Software"
Refer to "11.3 Formatting the D Drive"
Refer to "11.4 Setting System Startup Latency
and Task Bar Display"
Refer to "8.8 Installing the FN-PS551 Application
and Key Registry"
Refer to "11.5 Installing the Printer Interface
Board"
Refer to "11.6 Setting the Language for
FN-PS551 Application"
FN-PS551 Service Manual Maintenance-281
Maintenance-281
FP4F0240.EPS