Table of Contents
Advertisement
Maintenance 7. Service Utility
NOTE
The [Protocols:] list in the [Protocols] window shows all currently registered
protocols (no protocol is registered at installation).
To Add a Protocol
(1)
On the [Protocols] window, click [Add...] .
→ The [Add the PROTOCOL] window appears.
(Software ver. A00)
(2)
From the [Protocols:] list in the [Protocols] window, select a protocol to add,
then click [OK...].
→ The parameter settings window appears for the selected protocol
(go to "
To View and/or Modify Protocol Settings
(1)
From the [Protocols:] list in the [Protocols] window, select a protocol to view
or modify, then click [Properties...].
→ The parameter settings window appears for the selected protocol
(go to "
To Delete a Registered Protocol
(1)
From the [Protocols:] list in the [Protocols] window, select a protocol to delete,
then click [Remove].
→ The selected protocol is deleted.
006-251-03
03.30.2000 FM2730
Using Parameter Settings Windows").
Using Parameter Settings Windows").
Maintenance-51
(Software ver. A02 or later)
FN-PS551 Service Manual Maintenance-51
Advertisement
Chapters
Table of Contents
