Maintenance 8. Software Installation
→ The [Registry Editor] information appears.
(9)
Click [OK].
(10) To use other functions, insert the floppy disk for the key registry software
desired. Then, repeat step (7) to (9) shown above.
(11) Remove the key registry software disk from the disk drive.
(12) From the [Start] menu on the Windows desktop, click [Program] (or [All
Programs]), [Fuji Photo Film], and then [FN-PS551 Appl] to restart the FN-
PS551 application.
→ The FN-PS551 application restarts.
(13) Click the [Version] menu on the [FN-PS551] window.
→ The [Version] message appears.
(14) Check that the version information shows the installed key registry(s)
([DICOM], [TOSHIBA] and/or [IPU]).
Also, [IPU (PEM)] is displayed if IPU and PEM key registry software has
been installed.
→ For instance, if the DICOM key registry is installed, the screen should appear as
follows:
(15) Click [OK].
(16) Exit from the FN-PS551 application by clicking [Exit] in the [Exit] menu on
the [FN-PS551] window or clicking the close box
corner of the window.
006-251-07
10.28.2002 FM3487
Maintenance-247
in the top right-hand
FN-PS551 Service Manual Maintenance-247