FujiFilm FN-PS551 Service Manual page 92

Maintenance 7. Service Utility
(3) Specify printer interface parameters.
• [Interface:]:
Specifies the interface type ( "E-i/f" is only currently available).
• [pixel clock:]:
Specifies the transfer speed. For cable up to 60 m long, choose [1.0 µ sec/
pixel]; for cables over 60 m, choose [2.0 µ sec/pixel].
NOTE
Set the transfer speed to the printers indicated below to [2.0 µ sec/pixel].
FL-IM2636N, FL-IM3543N, FL-IM3543MN
Setting to [1.0 µ sec/pixel] will cause a transfer error between the FN-PS551
and these printers.
• [version:]:
Specifies the interface version.
The table below lists compatible printers.
Version
Type 1
Type 2
• [film size:]:
Select either [14 x 17 (inch)] (3543), [14 x 14 (inch)] (3535) or [11 x 14 (inch)]
(2636) for the printer's film size when "type 2" is selected for the printer
interface version.
• [film medium type:]:
Select either [blue] or [clear] for the film base color when "type 2" is selected
for the printer interface version.
(4) Click the [Model] tab.
→ The [Model] window appears.
006-251-07
10.28.2002 FM3487
Type
FL-IM D
FL-IM DM
FM-DP2636
FM-DP3543
FM-DP L
DRYPIX 1000
DRYPIX 3000
DRYPIX Link
FL-IM2636 II
FL-IM3543 II
FL-IM2636N
FL-IM3543N
FL-IM3543MN
Maintenance-71
Interface
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
E-i/f
TP4F0028.EPS
FN-PS551 Service Manual Maintenance-71