Table of Contents
Advertisement
Maintenance 11. Installing Software for GX260 Series Control Unit
(12) [Display Settings] appears on the screen, click [OK].
(13) [To begin, click your user name] appears on the screen, enter "pc-ps" in the
Administrator password box, then click
NOTE
Since the installation procedure requires logging on to Windows XP as an
administrator, the default value "Administrator" should be used.
After this, the Windows XP desktop appears.
(14) Remove the CD-ROM from the CD-ROM drive.
This completes the Windows XP installation process.
(15) Click [start] on the Windows desktop, then click [Turn off computer].
(16) From the [Turn off computer] window, click [Turn off] to switch off the power
to the control unit.
NOTE
After installation of Windows XP has been completed, perform " Preparation"
procedures again and recover the contents of [Boot Sequence](startup order)
to the status before change.
006-251-07
10.28.2002 FM3487
Maintenance-285
button.
FN-PS551 Service Manual Maintenance-285
Advertisement
Chapters
Table of Contents
