FujiFilm FN-PS551 Service Manual page 161

Maintenance 7. Service Utility
• [CR-IPU group information]:
Choose group information for FUJI protocol (IPU Function).
• [method:]:
• [position of film mark or menu character:]:
NOTE
When connecting with FM-DP L printers equipped with a sorter, sorting
information transmitted from FN-PS551 should not be "01," "02" or "03."
These numbers are duplicated and cannot be distinguished because "01,"
"02" and "03" are used as the default input channel codes for FM-DP L sorting.
006-251-04
07.24.2000 FM2824
Select one of the following two types of group information from the
drop-down list. Do not select others because they are not currently
available.
• [space (10)]:
Ten spaces are the group information. (default value)
Sorting is not performed for each FUJI protocol client so use the
sorting by input channel function of printer.
• [unit code(1)space(9)]:
FUJI protocol client's (Image Reader) unit code (1 character from
A to Z) and nine spaces are the group information.
Sorting is performed for each FUJI protocol client (Image Reader).
The unit code of FUJI protocol client (Image Reader) should be
checked in advance. Unit codes are set so that they are not
duplicated within the same facility.
Also, sorting is not performed for FUJI protocol client (HI-C/OD-F)
other than the Image Readers.
Set to "0" because the applicable parameter is not currently available.
Maintenance-132
FN-PS551 Service Manual Maintenance-132