Table of Contents
Advertisement
Maintenance 7. Service Utility
(2)
Set the following items.
• [sorting condition]:
Choose the sorting information to send to the printer.
• [by group ID]:
• [by unique ID]:
006-251-04
07.24.2000 FM2824
Group information from each determined protocol is sent to the printer
as sorting information. The sorting conditions (specified output bins)
for each group information must be specified at the printer end.
• DICOM protocol:
The first 10 characters of the AE Title of a client that issues a print
request are the group information.
Because the AE Title has a maximum of 16 characters, any
characters exceeding the 10th character are not reflected in the
group information. Therefore, if different clients have the same
first 10 characters, they are not differentiated. Also, spaces will
be inserted for the amount that is insufficient in AE Title not having
10 characters.
• TOSHIBA protocol: (Software version A03 or earlier)
The Modality Code (two characters) from a client that issues a
print request plus 8 spaces are the group information.
Confirm the content of the Modality Code on the client side. If
different clients have the same Modality Code, they are not
differentiated.
• TOSHIBA protocol: (Software version A04 or later)
The Modality Code (two characters) from a client that issues a
print request plus 8 characters of the client host name are the
group information.
Confirm the content of the Modality Code on the client side. If the
host name on the client is longer than 9 characters, the 8 characters
from the rear of the host name are inserted. Also, spaces will be
inserted for the amount that is insufficient in host name not having
8 characters.
• FUJI Protocol (IPU Function)
The contents selected by the following [CR-IPU group information]
[method:] are the group information.
This parameter is disabled (not currently available).
Maintenance-131
FN-PS551 Service Manual Maintenance-131
Advertisement
Chapters
Table of Contents
