Table of Contents
Advertisement
Maintenance 9. Setting the Control Unit (PC) to Use PEI01A Board
(9)
Click [Add Interrupt...].
→ The [Specify Interrupt] dialog appears.
(10) Select "5" to set the first DXA board, or "10" to set the second DXA board
with the down or up arrow key, and then click [OK].
→ Returns to the [Configure Unlisted Card] dialog. Then, the set interrupt number
("5" or "10") appears in the [IRQ:] field.
(11) Click [OK].
→ The setting confirmation screen appears.
006-251-05
05.30.2001 FM3069
Maintenance-257
FN-PS551 Service Manual Maintenance-257
Advertisement
Chapters
Table of Contents
