Table of Contents
Advertisement
Maintenance 7. Service Utility
(2)
Specify the following parameters.
• [27. Character Area0 (Standard) horizontal size:]:
Enter a horizontal size of the standard sized area 0 in this box in the range of
2 to 500/0.1mm (the default value is 500).
• [28. Character Area0 (Standard) vertical size:]:
Enter a vertical size of the standard sized area 0 in this box in the range of 2
to 268/0.1 mm (the default value is 268).
• [29. Character Area1 (Standard) horizontal size:]:
Enter a horizontal size of the standard sized area 1 in this box in the range of
2 to 458/0.1 mm (the default value is 458).
• [30. Character Area1 (Standard) vertical size:]:
Enter a vertical size of the standard sized area 1 in this box in the range of 2
to 174/0.1 mm (the default value is 174).
• [31. Character Area0 (Large) horizontal size:]:
Enter a horizontal size of the large sized area 0 in this box in the range of 2
to 980/0.1 mm (the default value is 980).
• [32. Character Area0 (large) vertical size:]:
Enter a vertical size of the large sized area 0 in this box in the range of 2 to
268/0.1 mm (the default value is 268).
• [33. Character Area1 (Large) horizontal size:]:
Enter a horizontal size of the large sized area 1 in this box in the range of 2
to 668/0.1 mm (the default value is 668).
• [34. Character Area1 (Large) vertical size:]:
Enter a vertical size of the large sized area 1 in this box in the range of 2 to
180/0.1 mm (the default value is 180).
NOTE
The above window is used to specify a size of area 0 and area 1 that is used
to output image with the film character area overlapping the image area on a
14"×17" film (3543). It is noted that the large size is selectable from the [23.
14*17 single character size of 14*17 film] only when 14"×17" sized image is
output in an equal scaling. For other image output, the standard size is
used.
006-251-04
07.24.2000 FM2824
Maintenance-121
FN-PS551 Service Manual Maintenance-121
Advertisement
Chapters
Table of Contents
