Basic Configuration Of The Fn-Ps551; Basic Configuration - FujiFilm FN-PS551 Service Manual

Maintenance 2. Basic Configuration of the FN-PS551
2.

Basic Configuration of the FN-PS551

Printer IF board
To printer

Basic Configuration

Control unit
Printer I/F board
Monitor
Keyboard
Mouse
Application software
Key registry software
NOTE
Operations with or without the aid of the Monitor, Keyboard, and Mouse
• The system runs normally without the monitor, keyboard or mouse. Consult
with the user to determine whether these components are necessary or
not with reference to the table below. If determined to be unnecessary,
these components may be removed.
• Even if the monitor is removed according to the user's judgement, the
system will not be affected by the removal. However, it is not possible to
determine the operating status of the system. It is also impossible to
determine any failure even if it occurs in the control unit or the OS.
• The monitor and keyboard are required to perform service operations such
as installation and maintenance of the system.
• User and service operations do not necessarily require the mouse.
However, they can be performed more efficiently with the use of the mouse.
Monitor and keyboard connected
Only Monitor connected
Neither connected
006-251-07
10.28.2002 FM3487
To Network
Control main unit
Keyboard
and mouse
Component
Windows NT or XP PC
E-I/F board
15-inch CRT
Includes all FN-PS551 functions
Used to enable specific FN-PS551 functions
Viewing the Operation Status
Description
Enabled
Enabled
Disabled
FN-PS551 Service Manual Maintenance-10
Maintenance-10
Monitor
Application
software
Key registry
software
FP4F0003.EPS
TP4F0003.EPS
Deleting the Print Job
Enabled
Disabled
Disabled
TP4F0004.EPS