Table of Contents
Advertisement
Maintenance 7. Service Utility
→ Dialog for selection of file to be acquired and specifications of transferred file
appears.
(2)
Check that "System File", "Log File" and "Data File" in [Acquisition of file] list
are checked, insert floppy disk for collecting analysis information in the floppy
disk drive and click [OK].
→ "Copying" message appears and analysis information is stored on floppy disk.
NOTE
If above mentioned step is executed without inserting floppy disk, a message
prompting disk insertion appears.
If this appears, insert a disk and click [OK].
(3)
When a disk becomes full, a message prompting change of disk appears.
006-251-05
05.30.2001 FM3069
Maintenance-137
FN-PS551 Service Manual Maintenance-137
Advertisement
Chapters
Table of Contents
