Table of Contents
Advertisement
Maintenance 8. Software Installation
(9)
Input the remaining capacity with the system partition size subtracted (varies
depending on the capacity of hard disk drive) as the size of the partition to be
created, and press <Enter> key.
The "D:" partition created here is used as an image space partition.
→ The screen for selecting partitions to install reappears. The newly created partition
is specified as "D: New (Unformatted)...".
NOTE
The illustration of the step (9) is an example for a 3.2 GB hard disk drive.
For a hard disk drive of over 6.4 GB, partition size for "C:" is displayed as
"2047 MB", however, for "D:" partition, the values displayed differ according
to the capacity of the hard disk drive.
006-251-05
05.30.2001 FM3069
Maintenance-152
FN-PS551 Service Manual Maintenance-152
Advertisement
Chapters
Table of Contents
