FujiFilm FN-PS551 Service Manual page 362

Installation 3. Starting up
(8) Click the [Version] menu on the menu bar. Check that the newly installed
specification ([DICOM], [TOSHIBA] or [IPU]) is displayed in the [Version]
message.
Also, [IPU (PEM)] is displayed if IPU and PEM key registry software has
been installed.
→ If the DICOM protocol specifications have been successfully added to existing
TOSHOBA specifications, the message should appear as follows.
(9) Click [OK] on the [Version] message.
(10) Exit from the FN-PS551 application by clicking [Exit] on the [Exit] menu in
the [FN-PS551] window or clicking the close box
corner of the window.
006-251-07
10.28.2002 FM3487
Installation-36
in the top right-hand
FN-PS551 Service Manual Installation-36