FujiFilm FN-PS551 Service Manual page 112

Maintenance 7. Service Utility
(9) For the A-VR method, choose [SHARP], [MEDIUM] or [SMOOTH] mode for
the [default smoothing type:]. Then specify the "Adjustment parameter" (fine
tuning) for each of these three modes.
• [edge detection:]:
If using the edge enlargement/reduction processing, choose [ON]. If not,
choose [OFF].
• [detection level:]:
Specify the edge detection level value in the range of 1 to 1,023.
• [sharpness:]:
Specify the sharpness adjustment parameter in the range of -70 to 300.
• [character color:]:
Choose [White] or [Black] for the continuous emphasis density settings flag
(the color specified for characters).
(10) For the SSM method, specify a mode in the [default smoothing type:].
• Choose [SHARP], [MEDIUM] or [SMOOTH] mode for the [default smoothing
type:].
(11) Click the [LUT] tab.
→ The [LUT] window appears.
006-251-04
07.24.2000 FM2824
Maintenance-91
FN-PS551 Service Manual Maintenance-91