FujiFilm FN-PS551 Service Manual page 129

Maintenance 7. Service Utility
(16) Specify client-dependent default settings for the output format.
• [border density:]:
Specify the border density in multiples of 100 × actual value (range = 0 to
300).
• [polarity (Pos./Neg.):]:
Choose either [normal (Pos.)] (black/white reversal off) or [reverse (Neg.)]
(black/white reversal on).
• [trim density:]:
Specify the image trim density in multiples of 100 × actual value (range = 0 to
300).
• [trim:]:
Choose either [ON] (with trim) or [OFF] (without trim).
• [trim width:]:
Specify the width of the trim in pixels (range = 1 to 9).
• [number of copies:]:
Specify the default number of print copies in the range of 1 to 99.
• [film size:]:
Select the default print size from [14 × 17 (inch)] (3543), [14 × 14 (inch)]
(3535), [11 × 14 (inch)] (2636), and [8 × 10 (inch)] (2025).
NOTE
[8 × 10 (inch)] (2025) size film is applicable only for DICOM clients with
software ver. A05 or later. Also, output printer must support [8 × 10 (inch)]
(2025) size film.
• [medium type (base color):]:
Choose either [blue] or [clear] for the default film base.
• [film orientation:]:
Choose either [PORTRAIT] or [LANDSCAPE] for the film orientation.
• [mirror:]:
Choose either [ON (mirror)] (glossy side to front) or [OFF (Normal)] (glossy
side to back).
006-251-05
05.30.2001 FM3069
Maintenance-100
FN-PS551 Service Manual Maintenance-100