FujiFilm FN-PS551 Service Manual page 359

Installation 3. Starting up
(3) Click [OK] on the [Version] message.
(4) Exit from the FN-PS551 application by clicking [Exit] on the [Exit] menu in
the [FN-PS551] window or clicking the close box
corner of the window.
→ The FN-PS551 application is now terminated.
NOTE
If the boots up display of Windows or [FN-PS551] window does not appear
within a reasonable time after turning on the power (i.e., after the HDD access
light has gone out), or if it is not displayed in appropriate brightness, check
that the cable between the monitor and control unit is correctly connected,
and the power is on. Adjust the brightness and/or contrast as described in
the operating manual provided with the monitor if necessary.
006-251-07
10.28.2002 FM3487
Installation-33
in the top right-hand
FN-PS551 Service Manual Installation-33