FujiFilm FN-PS551 Service Manual page 71

Maintenance 7. Service Utility
• [Number of associations] (supporting software ver. A07 or later):
Number of associations to be established simultaneously for DICOM protocol.
NOTE
Do not change the default values in (6) because it is not necessary to change
settings using this function.
• [Association establishment restriction by the memory] (supporting software
ver. A07 or later):
When connecting with multiple DICOM clients simultaneously, settings must
be made as to whether dynamic association establishment restriction control
is to be performed or not to avoid connection errors.
• [enable]: Establishment of association is restricted by the remaining
• [disable]: Restriction according to remaining memory capacity is not
NOTE
The following control is performed for dynamic association establishment
restriction.
• Judgement as to whether to accept a requested connection is made
according to the memory capacity mounted on FN-PS551, memory
capacity actually used by a connected client and the expected memory
capacity that may be used by a client requiring a connection.
• If the connection request is not accepted, stand-by while monitoring
whether the connection process is completed. If the connection request
is not accepted even after 30sec., a reject (connection disabled) message
is returned to the client requesting connection.
• In the case of a client connecting with FN-PS551, max. memory capacity
used by the client is stored. Based on this data, the expected memory
capacity that may be used by a client requesting a connection is judged.
006-251-07
10.28.2002 FM3487
memory capacity (default value).
This is set when connecting only with FCR console (CR-
IR346CL/348CL).
performed.
This is set when another modality connections other than
FCR console are included.
Maintenance-53.1
FN-PS551 Service Manual Maintenance-53.1