Table of Contents
Advertisement
Installation
4. OS Settings
(2)
Click [Change...] .
→ The [Identification Changes] dialog appears.
(3)
Enter the host name in the [Computer Name:] box to be distinguished from
others on the network, then click [OK] .
→ The [Identification] tab on the [Network] dialog reappears.
NOTE
• The computer (or host) name can be entered in either lowercase or
uppercase. However, it is always displayed in uppercase in either case.
• For the FUJI protocol (FINP) (supporting software ver. A03 or later), the
maximum length of computer (or host) name is limited to 10 characters.
For other protocols, it is limited to 15 characters.
• The computer (or host) name must be unique within the installation site. If
more than one FN-PS551 is used in the same installation site, each unit
must be given a different and unique name.
• For the [Workgroup:] and [Domain:] boxes, the default values should be
used.
006-251-07
10.28.2002 FM3487
Installation-43
FN-PS551 Service Manual Installation-43
Advertisement
Chapters
Table of Contents
