FujiFilm FN-PS551 Service Manual page 157

Maintenance 7. Service Utility
(2) Set the following parameters.
• [Logging]:
Keeps a log of records of communication between FN-PS551 and devices
connected to it. The default value is both off (i.e., logging off).
• [network]:
• [printer]:
Communication record level settings with the DICOM protocol client can be
set on software version A04 or later.
• [normal]:
• [detail]:
Also, system operation slows down slightly when logging is on.
NOTE
When using "7.11 Analysis Information Collection" function for software ver.
A05 or later, it is necessary to specify prior acquisition of this setting as log
information and then print out from each client.
Even if "7.11 Analysis Information Collection" is carried out if acquisition of
log information is not specified, log file necessary for analysis is not collected.
• [output image to a file]:
Stores processed image data as a file to enable on-screen viewing.
• [ON]:
• [OFF]:
The default setting is [OFF]. Note that changing this setting to [ON] inhibits
normal printer output.
• [Precedence]:
Specifies whether to give a priority to input or output processing.
• [Input]:
• [Output]:
006-251-05
05.30.2001 FM3069
Records communication between FN-PS551 and
network devices.
Records communication between FN-PS551 and
printers.
Normal log information (default setting)
Detailed log information
Stores data in a file (data is not output to printer).
Stores not data in a file (data is output to printer).
Input processing takes priority (default).
Output processing takes priority.
FN-PS551 Service Manual Maintenance-128
Maintenance-128