Outline Of Specifications - FujiFilm FN-PS551 Service Manual

Maintenance 1. System Overview

Outline of Specifications

Category
System
Processing
capacity
Hardware
Network I/F
Printer I/F
Compatible
printers
Image reception
protocol
Image processing
for CR image
Image processing
for IM image
Image spooling
Languages
NOTE
• The FUJI specifications based image reception protocol and CR image
processing support software ver. A03 or later.
• The specifications of the hardware are subject to change without notice.
006-251-07
10.28.2002 FM3487
Software image processing print server
IM image:
• Approx. 120 films/hour (512 x 512 x 8 bits, 12 frame format; based on
CT/MR images)
CR image (IPU function; MFP):
• Approx. 160 films/hour (E-I/F board; DXA01A),
approx. 225 films/hour (E-I/F board; PEI01A)
(14" x 17" standard quality image, 1760 x 2140 x 10 bits, one-image format)
• Approx. 75 films/hour (E-I/F board; DXA01A),
approx. 100 films/hour (E-I/F board; PEI01A)
(14" x 17" high quality image, 3520 x 4280 x 10 bits, one-image format)
CR image (IPU function; PEM):
• Approx. 65 films/hour (E-I/F board; PEI01A)
(18 x 24 cm high quality image, 1770 x 2370 x 10 bits, one-image format)
• Approx. 45 films/hour (E-I/F board; PEI01A)
(24 x 30 cm high quality image, 2364 x 2964 x 10 bits, one-image format)
Windows NT or XP PC (Pentium II, Pentium III or Pentium IV; 400 MHz or
higher, Memory; 128 MB or more, HDD; 3.2 GB or more, CD-ROM, 3.5" FDD)
100BASE-TX/10BASE-T
E-I/F
FL-IM D, FL-IM DM, FL-IM3543 II, FL-IM2636 II, FL-IM3543N, FL-IM3543MN,
FL-IM2636N, FM-DP2636, FM-DP3543, FM-DP L, DRYPIX 1000, DRYPIX 3000,
DRYPIX Link
Up to two printers can be connected. Mutual backup is possible when two
printers are connected.
DICOM specifications (IM images, processed CR
• DICOM Basic Grayscale Print Management
(Refer to the DICOM Conformance Statement for details.)
TOSHIBA specifications (IM image):
• TOSHIBA network print specifications Rev. 1.2
FUJI specifications (Unprocessed CR
• Fuji Integrated Network Protocol (FINP)
As for FCR 5000 series
• Enlargement/reduction processing
• Format processing
• Tonal conversion/Spatial frequency processing (GP/RP)
• Dynamic range control processing (DRC)
• Tomographic artifact suppression processing (TAS)
• Multi-objective frequency processing (MFP)
• Pattern enhancement processing for mammography (PEM)
(option, support software ver. A04 or later)
As for MF-300 series
• Enlargement/reduction processing (SSM/A-VR)
• Tone correction processing (BAR/SAR)
• Format processing
Overlay processing
Can spool to internal HDD
Application window display support for eight languages:
English (United States) - Factory default, French (Standard or France),
German (Standard or Germany), Italian (Standard or Italy),
Norwegian (Bokmal), Swedish, Spanish (Modern Sort or Spain), Danish
Specification
images):
images):
FN-PS551 Service Manual Maintenance-5
Maintenance-5
TP4F0001.EPS