Error Messages, Causes, And Remedies - FujiFilm FN-PS551 Service Manual

Maintenance 3. Error Codes
3.2

Error Messages, Causes, and Remedies

NOTE
[%n%1] in the [Message] column of the following table represents a message
required for error analysis.
Each message varies depending on circumstances of each error.
Source Name: PCPSMain
Event ID Level
1 Error
2 Error
3 Error
4 Error
5 Error
6 Error
7 Error
8 Error
9 Error
10 Error
11 Error
12 Error
13 Error
14 Error
15 Error
006-251-03
03.30.2000 FM2730
Message
PC-PS system information
file access failed. %n%1
Calling 'Run' method failed.
%n%1
Calling 'RestorePrintJOB'
method failed. %n%1
Calling 'SetFilmEndStatus'
method failed. %n%1
Calling
'DoPrinterStatusChanged'
method failed. %n%1
Calling
'SetRawDataEndStatus'
method failed. %n%1
Calling
'SetImgPrcEndStatus'
method failed. %n%1
Error return on
'EndRestorePrintJOB'
event. %n%1
Calling 'AnsPrintCheck'
method failed. %n%1
Calling 'ExecPrint' method
failed. %n%1
Calling 'OnEndPrint' method
failed. %n%1
Calling 'AnsOnPrintRequest'
method failed. %n%1
Calling 'SetJOBPriority'
method failed. %n%1
Calling 'DoSpool' method
failed. %n%1
Calling 'AnsPrinterInfo'
method failed. %n%1
Cause
System information file
access failed.
Execute start request
failed.
The restore
unprocessed job request
method call failed.
The film output complete
setting request method
call failed.
The change printer
status method call failed.
The raw data
transmission completed
set request method call
failed.
The image processing
completed setting
request method call
failed.
Error returned after
completion of
unprocessed job
restoration.
The print request
availability check answer
method call failed.
The raw data
transmission request
method call failed.
Job completed
notification failed.
The print request
completed notification
call failed.
The change job priority
request method call
failed.
The job spool request
method call failed.
The printer information
request answer method
call failed.
FN-PS551 Service Manual Maintenance-13
Maintenance-13
Remedy
Check to see if the system
settings file is intact or
damaged.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Exit FN-PS and delete all
unprocessed JOB files,
then restart.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
TP4F0009.EPS