Installing The Video Driver; Installing The Video Driver For A Gx1 Series Control Unit - FujiFilm FN-PS551 Service Manual

Maintenance 8. Software Installation
8.4

Installing the Video Driver

NOTE
Execute either "
or "
below according to the model of control unit (DELL OptiPlex GX1 Series or
GX110 Series).

Installing the Video Driver for a GX1 Series Control Unit

The following will be required for the installation;
• ATI 3D RAGE PRO Video Drivers disk
(For a GX1 series control unit)................................................................ X 1
CAUTION
Ensure that the install disk is write-protected (write-disabled).
(1) From the [Start] menu on the Windows NT desktop, click [Settings] and then
[Control Panel].
→ The [Control Panel] window appears.
(2) Double-click the [Display] icon.
→ The [Display Properties] window appears.
006-251-05
05.30.2001 FM3069
Installing the Video Driver for a GX1 Series Control Unit"
Installing the Video Driver for a GX110 Series Control Unit" shown
Maintenance-206
FN-PS551 Service Manual Maintenance-206