Table of Contents
Advertisement
Maintenance 7. Service Utility
• [Use Presentation LUT:] (supporting software ver. A05 or later):
For Presentation LUT information sent by client, choose either [No] (use
LUT content set for FN-PS551) or [Yes] (use LUT content sent by client,
default). If print is not output with expected tone using LUT information sent
by client, adjust to output print with proper tone using LUT setting of
FN-PS551.
• [Data transfer timeout:] (supporting software ver. A05 or later):
For [Timeout:] (setting timeout value for communication) set by [DICOM
Property] window of [Protocols] tab, choose either [disabled] (ignore timeout)
or [enabled] (timeout, default).
• [Use extension format:] (supporting software ver. A02 or later):
Choose [Yes] to use the specialized extension format for a particular client.
Choose [No] (default) when clients shown below are not connected.
If [Yes] is selected, enter an ID in the [ID:] field to identify extension formats
used by clients shown in the following table.
Manufacture
Philips
HITACHI Medico
Fuji Photo Film
• [Use default annotation:] (supporting software ver. A02 or later):
This parameter appears only when [Yes] is selected in the [Use extension
format:] described above. If using the [Annotation] set in the service utility,
choose [Yes]. If not, choose [No] (default).
NOTE
The parameters shown above should be set according to the data included
in the Setting List of the relevant model in the [Modality Connection List].
006-251-06
12.18.2001 FM3271
Model
ID
Easy Vision
EV
DR2000 Series
HM
Clavis View
HM
QA-WS771
CR
HI-C655
CR
CR-IR346CL
CR
(Console for FCR
XG-1)
CR-IR348CL
CR
(Console for FCR
5000 series)
Synapse
CR
Maintenance-85
Use default annotation
No
No
If user requires Annotation
output set using the service
utility of FN-PS551, select
[Yes], otherwise select [No].
No
No
No
No
No
TP4F0032.EPS
FN-PS551 Service Manual Maintenance-85
Advertisement
Chapters
Table of Contents
