FujiFilm FN-PS551 Service Manual page 34

Maintenance 3. Error Codes
Source Name: EifPrDrv
Event ID Level
1 Error
2 Error
3 Error
4 Error
5 Error
Source Name: ImagePr
Event ID Level
1 Error
2 Error
3 Error
4 Error
5 Error
6 Error
006-251-03
03.30.2000 FM2730
Message
System call has failed.
%n%1
SMCU Driver error. %n%1
EIFIMG Driver error. %n%1
Received unexpected
command. %n%1
Unable to setup timers.
%n%1
Message
System call has failed.
%n%1
Unable to get system
memory. %n%1
Unable to create image
processing object. %n%1
Unable to get image
processing parameter.
%n%1
File operation error. %n%1
Image processing error.
%n%1
Cause
A system call error
occurred.
An error occurred in
SMCU driver operation.
An error occurred in
EIFIMG driver operation.
An unsupported
command was received
from the printer.
An attempt to set timer
settings failed.
Cause
A system call error
occurred.
An attempt to acquire
system memory failed.
An attempt to create an
image processing object
failed.
An attempt to obtain
either the print job or film
object, or the image
processing parameters
failed.
An attempt to create or
open a file failed.
All attempts at image
processing result in
error.
FN-PS551 Service Manual Maintenance-21
Maintenance-21
Remedy
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
TP4F0018.EPS
Remedy
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Check that the print job
and the film objects and
the image processing
parameters are set
correctly.
Check that the designed
file is present.
Check that the print job
and film objects and the
image processing
parameters are set
correctly.
Restart, and/or check that
the system is installed
correctly.
Check that the print job
and the film objects and
the image processing
parameters are set
correctly.
TP4F0019.EPS