Installation
2. Setting Up the Equipment
(1)
Connect the keyboard, mouse, and network cable to their respective I/O
ports on the rear panel of the control unit.
NOTE
Ensure that the mouse and keyboard are connected to the appropriate ports
because they have the same shaped connectors. Mouse and keyboard cannot
be operated if they are incorrectly connected.
(2)
Connect the CRT monitor cable connector to the monitor connector I/O port.
006-251-07
10.28.2002 FM3487
Network cable
Installation-29
FN-PS551 Service Manual Installation-29
FP4B0011.EPS
FP4B0012.EPS