Table of Contents
Advertisement
Maintenance 8. Software Installation
(4)
Press <Enter> key to continue automatic detection.
→ The message [Please insert the disk labeled Windows NT Workstation Setup Disk
#3 into Drive A:] appears.
(5)
Remove the Disk #2 and insert the "Windows NT Workstation Setup Disk #3"
into the floppy disk drive and press <Enter> key.
→ After approximately one minute, the screen displays the storage devices detected
in detail.
006-251-04
07.24.2000 FM2824
Maintenance-144
FN-PS551 Service Manual Maintenance-144
Advertisement
Chapters
Table of Contents
