FujiFilm FN-PS551 Service Manual page 343

Installation 2. Setting Up the Equipment
DPSW1 Settings
No.
Remote signal switching
1
2
3
4
DPSW2 and DPSW3 Settings
No.
DPSW2 1 to 8 Switching Between A and All ON ∗
DPSW3 1 to 8
SW0 Settings
No.
1-2 Board ID=1
2-3 Board ID=0
SW2, SW3, SW4 and SW5 Settings
SW2 E-I/F parity setting
SW3 E-I/F parity setting
SW4 E-I/F parity setting
SW5 E-I/F parity setting
006-251-03
03.30.2000 FM2730
Function
Function
B devices
Function
#1
Short
Function Setting
Short
Short
Setting
• To input remote signal from an external
OFF
device, set 1 and 2 to On and 3 and 4 to
OFF
OFF
• To enable software control and to send
ON
remote signal to an external device, set 1
and 2 to OFF and 3 and 4 to ON (Settings for
ON
this FN-PS551)
Setting
• A device=DPSW2 all ON and DPSW3 all
OFF (Settings for this FN-PS551)
∗ When the printers indicated below are
connected, set 1 and 2 to OFF and
3 to 8 to ON of DPSW2
All OFF
FL-IM2636N, FL-IM3543N,
FL-IM3543MN
• B device=DPSW2 all OFF and DPSW3
all ON
Setting
#2
Short • For PEI board #1, 2 and 3 shorted
• For PEI board #2, 1 and 2 shorted
Description
• SW3 and SW4 shorted=EVEN parity
• SW2 and SW5 shorted=ODD parity
(Settings for this FN-PS551)
FN-PS551 Service Manual Installation-17
Installation-17
Description
TP4B0029.EPS
Description
TP4B0030.EPS
Description
TP4B0031.EPS
TP4B0032.EPS