Maintenance 7. Service Utility
7.10
Saving and Restoring Settings Files
The [File] menu on the [SERVICE UTILITY] windows can be used to save service utility
settings files on a floppy disk and restore settings from the floppy disk.
NOTE
Before proceeding with this procedure, get ready a floppy disk (DOS
formatted) for saving settings files.
Saving a Settings File
CAUTION
To save a settings file, enter or modify the settings as desired, click [OK] to
exit from the [SERVICE UTILITY], then restart the [SERVICE UTILITY].
The settings changed at [SERVICE UTILITY] will not be actually changed if
the data is saved without clicking [OK].
(1)
Insert a floppy disk for saving a settings file into the disk drive.
(2)
From the [File] menu, click on [Save].
→ The settings file is saved onto the floppy disk.
006-251-04
07.24.2000 FM2824
Maintenance-134
FN-PS551 Service Manual Maintenance-134