Configuration Settings - FujiFilm FN-PS551 Service Manual

Installation

5. Configuration Settings

5. Configuration Settings
(1) Start up the Service Utility to make configuration settings of the FN-PS551
depending to the configuration of the system which the FN-PS551 is installed.
NOTE
Refer to "7. Ser vice Utility" in the "FN-PS551 Service Manual:
MAINTENANCE" for further information about starting up and terminating
the Service Utility, and configuration settings.
CAUTION
Never use [Logging] settings on the [SERVICE UTILITY] window at installation
and normal service because they are used to analyze the design and
configuration. Only if a request is made by the Service Headquarters to use
the settings, make use of them according to their instructions.
(2) After completing all setting steps through the Service Utility, click [OK] on the
[SERVICE UTILITY] window to terminate the Service Utility.
006-251-07
10.28.2002 FM3487
Installation-52
FN-PS551 Service Manual Installation-52