Table of Contents
Advertisement
Installation
7. Save Settings
Switch off the power to the control unit (For Windows NT)
(1)
Click [Start] on the Windows desktop, then click [Shut Down...] .
→ The [Shut Down Windows] dialog appears.
(2)
Select [Shut down the computer?], and then click [Yes] .
→ The [Shut Down Windows] message appears.
NOTE
Choosing [Restart the computer?] or clicking the [Restart] on the [Shut Down
Windows] message at step (2) will shut down and restart the computer, and
start up the FN-PS551 application automatically. In this case, exit from the
FN-PS551 application once,and then repeat steps (1) and (2).
(3)
Switch off the power to the control unit and monitor.
Switch off the power to the control unit (For Windows XP)
(1)
Click [start] on the Windows desktop, then click [Turn off computer].
→ The [Turn off computer] window appears.
(2)
Click [Turn off].
→ The power to the control unit is switched off.
NOTE
Clicking [Restart] on the [Turn off computer] window at step (2) will shut
down and restart the computer, and start up the FN-PS551 application
automatically. In this case, exit from the FN-PS551 application, and then
repeat steps (1) and (2).
(3)
Switch off the power to the monitor.
006-251-07
10.28.2002 FM3487
Installation-61
FN-PS551 Service Manual Installation-61
Advertisement
Chapters
Table of Contents
