FujiFilm FN-PS551 Service Manual page 20

Maintenance 1. System Overview
Contents of Display
Job Status
[1]
[2]
[3]
[4]
[5]
[6]
[7]
Equip. Status
[8]
[9]
[10] 14in * 17in,
Display of Title Bar
[11]
[12]
006-251-05
05.30.2001 FM3069
Job Job ID name of up to 15 characters.
For DICOM protocol, this is the first 15 characters of the film
session label.
For TOSHIBA protocol and FUJI protocol, it is the first 15
characters of the patient name. (If the patient name is not
provided, the ID number TOSHIBA protocol T-xxxxx, FUJI
protocol F-xxxxx (xxxxx=00001 to 99999) will be automatically
generated.)
User Name of user requesting job (for DICOM protocol,
the AE Title of the remote device;
for TOSHIBA protocol and FUJI protocol, host
name of the remote device); maximum 8 characters.
Status Blank
Processing
Waiting to print From completion of image processing of all
Printing
Error
Copies Number of films not yet output. Number decreases with each
film output.
Size Size of film output.
Date The date and time on which the print instruction was received.
Destination Indicates which of the two printers will be used.
Equipment Names of two printers; maximum eight characters each.
Status Shows the printer status.
Off line (line cannot be connected)/Operating/Film Empty/
Chemicals Empty/Receiver Full/Error/In Maintenance/
Test Mode
For the film sizes that can be used, "O" appears, for the film
sizes that can not be used, "-" appears.
14in * 14in,
Applied film sizes:
11in * 14in,
14in * 17in: 3543
8in * 10in 11in * 14in: 2636
(8in * 10in: 2025 is applicable to software ver. A05 or later.)
Shows the version of FN-PS551 application software
A**
Shows active function(s) (a maximum of three functions) of
[DICOM]
[TOSHIBA] FN-PS551 application.
Each of the key registry software must be installed. Unless
[IPU]
corresponding protocol(s) are set with Service Utility, the
function(s) do(es) not appear (i.e. the function(s) shall not be
active).
To be processed.
From image processing of the first film in the
job through to completed processing of the last
film.
films in the job until output of the first film.
From printing of the first film in the job to
completed printing of the last film.
Error occurs in image processing.
14in * 14in: 3535
8in * 10in: 2025
FN-PS551 Service Manual Maintenance-7
Maintenance-7
TP4F0304.EPS
TP4F0002.EPS
TP4F0305.EPS