FujiFilm FN-PS551 Service Manual page 35

Maintenance 3. Error Codes
Source Name: Spooler
Event ID Level
1 Error
2 Warning
3 Warning
4 Warning
5 Warning
6 Warning
7 Warning
8 Warning
9 Warning
10 Warning
11 Warning
12 Warning
13 Warning
14 Warning
15 Warning
16 Warning
006-251-03
03.30.2000 FM2730
Message
Error occurred with creating
thread. %n%1
Error occurred with posting
message to thread. %n%1
Insufficient memory. %n%1
Creation of PrintJob
dispatch driver failed.
%n%1
PrintJob file read failed.
%n%1
Item size is invalid. %n%1
Getting to item data failed.
Addition of spooler queue
failed. %n%1
Film Object is invalid.
%n%1
Deleting raw file was failed.
%n%1
Status was invalid. %n%1
PrintJob dispatch pointer is
invalid. %n%1
Film Object Number is
invalid. %n%1
PrintJob was not found for
Deleting. %n%1
Printer information was not
found. %n%1
Change priority is invalid.
%n%1
Cause
Thread creation failed
(internal error).
Message transmission
failed (internal error).
An attempt to obtain
memory failed
(internal error).
An attempt to create a
Print job object when an
unprocessed job was
restored failed.
An attempt to read a
print job file failed.
The data size for the
print job or film object is
invalid.
Print job or film object
data acquisition failed.
An attempt to register
in the spooler queue
failed.
Either the film object is
invalid or there is
insufficient data.
An attempt to delete a
raw data file failed.
The status of this FN-PS
itself is invalid.
A print job access
attempt failed.
The designated film
number is invalid.
The print job
nominated in the
queue delete request
was not found.
Printer information for
the nominated printer
was not found.
The designated
priority change is not
valid.
FN-PS551 Service Manual Maintenance-22
Maintenance-22
Remedy
Restart, and/or check that
the system is installed
correctly.
Memory and/or resources
may be insufficient. Quit
other open applications.
Memory and/or resources
may be insufficient. Quit
other open applications.
The print information file
may be damaged, or the
associated film information
file may be missing.
The print information file
may be damaged, or the
associated film information
file may be missing.
Check the print job and film
object data.
Check the print job and film
object data.
Check the print job priority.
Check the contents of the
film object.
Check to see if the raw
data file is being accessed
by another device.
It quit although there was
no startup request. A
different request came
although it was not running.
Check to see if print job
data has already been
deleted.
Check the method
parameters for film object
access.
Check the method
parameters for the queue
delete request.
Check the printer
designated in the print job.
Check the method
parameters for the priority
change.
TP4F0020.EPS