FujiFilm FN-PS551 Service Manual page 298

Maintenance 10. Installing Software for GX150 Series Control Unit
(18) [Begin Logon] message appears, so press <Ctrl>, <Alt> and <Delete> keys
simultaneously.
(19) Type "pc-ps" in the [Password:] box of [Logon Information] dialog, then click
[OK].
CAUTION
Since the installation procedure requires logging on to Windows NT as the
administrator, the default value "Administrator" for the [User name:] field
should be used.
(20) [Welcome to Windows NT] message appears after logging on to Windows
NT, so click [Close].
This completes the Windows NT installation process.
NOTE
After installation of Windows NT has been completed, perform " Preparation"
procedures again and recover the contents of [Boot Sequence] (startup order)
to the status before change.
006-251-06
12.18.2001 FM3271
Maintenance-269
FN-PS551 Service Manual Maintenance-269