FujiFilm FN-PS551 Service Manual page 27

Maintenance 3. Error Codes
Source Name: PCPSMain
Event ID Level
16 Error
17 Error
18 Error
19 Error
20 Error
21 Error
22 Error
23 Error
24 Error
25 Error
26 Warning
27 Error
28 Error
006-251-03
03.30.2000 FM2730
Message
Calling 'GetImgPrcJOB'
method failed. %n%1
Calling 'GetRawDataJOB'
method failed. %n%1
Calling 'DeleteJOB' method
failed. %n%1
Calling
'PrinterStatusChange'
method failed. %n%1
Calling 'ExecPrint' method
failed. %n%1
Calling 'AnsSetPrintPriority'
method failed. %n%1
Calling 'GetPrintJOBCount'
method failed. %n%1
System setting is invalid.
%n%1
Printer information is not
found. %n%1
Calling 'ExeImageProcess'
method failed. %n%1
Hard disk is full. %n%1
Calling 'PrintJOBMake'
method failed. %n%1
File copy error. %n%1
Cause
The get image
processing job request
method call failed.
The get raw data
transmission job request
method call failed.
The delete request
method call failed.
The change in printer
status notification
method call failed.
The raw data
transmission request
method call failed.
The change in job
priority completed
method call failed.
The number of PrintJob
acquisition request
method calling failed.
System information file
not set correctly.
Printer information
cannot be found for the
designated printer.
The image processing
request method call
failed.
No open space on disk.
The PrintJob creation
request calling failed.
File copying error.
FN-PS551 Service Manual Maintenance-14
Maintenance-14
Remedy
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
Check that all Service
Utility settings are correct.
Check that printer settings
in the Service Utility are
correct.
Restart, and/or check that
the system is installed
correctly.
Stop image input. Start
again after all print
processing is completed.
Restart, and/or check that
the system is installed
correctly.
Restart, and/or check that
the system is installed
correctly.
TP4F0010.EPS