Temperature And Humidity; Power Supply Conditions; Environment Conditions - FujiFilm FN-PS551 Service Manual

Installation 1. Installing Conditions
1.3

Temperature and Humidity

Unit
Control unit During operation 10°C to 35°C
Non-operation
15-inch CRT monitor During operation 5°C to 40°C
Non-operation
1.4

Power Supply Conditions

Unit
Control unit
15-inch CRT monitor
Phase
Frequency
Grounding resistance :
1.5

Environment Conditions

Do not use the equipment:
• In a location subject to extreme changes in temperature
• Near a heater or other heating elements
• In a location possibly subject to water leakage or flooding
• In the vicinity of corrosive gas
• In a dusty and/or dirty environment
• In a location subject to continuous and/or excessive vibration or shock
• In a location exposed to direct sunlight
CAUTION
In addition, the monitor should not be used:
• In a confined space such as a rack case
• In a location where the screen is exposed to strong light
• In the vicinity of electrical equipment such as a transformer, motor, or
power cable generating an AC magnetic field of 0.02 Gauss or greater
006-251-07
10.28.2002 FM3487
Condition Temperature
-40°C to 65°C 20% to 80 % RH
-40°C to 60°C 5% to 95 % RH
Mains Voltage/Capacity
115 or 230 V AC/approx.
0.2 kVA
115 or 230 V AC/approx.
0.2 kVA
: Single phase
: 50/60 Hz
100 ohm or less
Humidity
20% to 80 % RH
(with no
dew condensation)
(with no
dew condensation)
10% to 80 % RH
(with no
dew condensation)
(with no
dew condensation)
Remarks
Supplied from 115 or 230 DELL OptiPlex GX260
V AC power outlet
Supplied from 115 or 230 DELL E551
V AC power outlet
FN-PS551 Service Manual Installation-6
Installation-6
Applicable model
DELL OptiPlex GX260
DELL E551
TP4B0003.EPS
Applicable model
TP4B0004.EPS