Table of Contents
Advertisement
Installation
2. Setting Up the Equipment
(3)
Connect the printer cable connector to the E-I/F board connector.
Printer I/F cable
NOTE
To use an existing E-I/F cable with normal-sized connectors at both ends,
attach the optional extra E-I/F connector converter cable before connecting
to the E-I/F board.
(4)
Check that the voltage selector switch (located to the right of the AC power
connector) is set to the correct voltage (115 V for 100 to 120 V AC power
supply or 230 V for 200 to 240 V AC power supply). The factory default is 230
V.
NOTE
The DELL OptiPlex GX260 series control unit model does not have a voltage
selector switch (Automatic detection of voltage).
006-251-07
10.28.2002 FM3487
FP4B0013.EPS
FN-PS551 Service Manual Installation-30
Installation-30
FP4B0014.EPS
Advertisement
Chapters
Table of Contents
