Maintenance 7. Service Utility
NOTE
• The protocols displayed on the [Protocols:] list in the [Add the PROTOCOL]
window do not necessarily correspond to the functions enabled in the key
registry software (i.e., DICOM, TOSHIBA or IPU). Always the protocol list
indicates all protocols.
Only protocols enabled by the key registry software are available for use.
Selecting another protocol dose not make it available for use.
• FN-PS551 supports the following three protocols (when the appropriate
key registry software programs must be installed):
006-251-03
03.30.2000 FM2730
• DICOM: Specify DICOM parameters.
• TOSHIBA: Specify TOSHIBA parameters.
• Multi Modality DMS (FINP): Specify IPU function parameters under
FUJI protocol (FINP) (supporting software ver. A03 or later).
Maintenance-49
FN-PS551 Service Manual Maintenance-49