Maintenance 9. Setting the Control Unit (PC) to Use PEI01A Board
(6)
Confirm that the set interrupt number in the [IRQ:] field for one "Unknown
Card" is "5" and that for other "Unknown Card" is "10".
(7)
Click [Close].
→ Returns to the [ISA Configuration Utility] window.
(8)
Repeat the steps (5) to (7) for seeing the [Card Resource Usage] dialog for
the other "Unknown Card", and confirm the interrupt number in the similar
procedure.
(9)
Click the [Exit] in the [File] menu when the confirmation is completed.
→ ISA Configuration Utility is completed, and "C:\ICU>" appears.
(10) Remove the disk from the floppy disk drive, and switch off the power to the
control unit and monitor.
(11) Reinstall the PEI or DXA boards in the control unit.
006-251-05
05.30.2001 FM3069
Maintenance-261
FN-PS551 Service Manual Maintenance-261