Table of Contents
Advertisement
Maintenance 7. Service Utility
(Software ver. A04 or later)
NOTE
• The [FINP Property] window is available with software ver. A03 or later
although it appears even with software ver. A02 or later.
• Any setting cannot be made as the "Distribution Code" on the [FINP
Property] window is disabled (not currently available).
• To use the IPU function, specify parameters according to the procedure
described in the "
Updating Editor" and "
006-251-03
03.30.2000 FM2730
Setting Image Processing", "
Setting Data recieve if the printer is off-line".
FN-PS551 Service Manual Maintenance-57
Maintenance-57
Setting Parameter
Advertisement
Chapters
Table of Contents
