Table of Contents
Advertisement
Maintenance 8. Software Installation
(2)
Remove the CD-ROM and floppy disk from the respective drives and press
<Enter> key.
→ The system restarts.
CAUTION
To prevent malfunction during restart and ensure that the system restarts
successfully, always remove both the CD-ROM and floppy disk from their
respective drives. In the event of failure of restart, reinstall Windows NT from
scratch. It may be possible to restart (after removing the disks) by holding
down <Ctrl>+<Alt>+<Delete> keys simultaneously. Try this step before
beginning reinstallation.
→ When the system has successfully restarted, the [Insert Disk] message appears.
006-251-04
07.24.2000 FM2824
Maintenance-156
FN-PS551 Service Manual Maintenance-156
Advertisement
Chapters
Table of Contents
