FujiFilm FN-PS551 Service Manual page 33

Maintenance 3. Error Codes
Source Name: TPrc
Event ID Level
84 Warning
85 Warning
86 Warning
87 Warning
88 Warning
89 Warning
91 Warning
92 Warning
93 Warning
94 Warning
95 Warning
99 Warning
Source Name: DICOM
Event ID Level
1 Error
2 Error
3 Error
4 Error
006-251-03
03.30.2000 FM2730
Message
(Network error) Receiving
data was aborted.
(Network error) Sending
data was aborted.
(Internal process error) Error
occurred with creating
thread(TPS).
(Internal process error) Error
occurred with creating
thread(TPR).
(Illegal input data) Data size
was too long, and overflow
buffer.
(Network error) ABOR
command was sent.
(Interface error) Timeout
occurred with sending each
images.
(Interface error) Timeout
occurred with FTP.
(Internal process error) Error
occurred with accessing
image information file.
(Internal process error) Error
occurred with accessing
image file.
(Internal process error) Error
occurred with accessing
overlay file.
(Internal process error)
Unknown error occurred.
Message
Initialization failed.[DPM
Invoke fail]
Initialization failed.[Invalid
DICOM.dat]
Initialization failed.[DPC
Invoke fail]
Initialization
failed.[Insufficient memory]
Cause
An abort data reception
request was received
from the other device.
Data transmission was
aborted.
An attempt to launch a
sub-process failed.
An attempt to launch a
sub-process failed.
The image data was too
long to be received.
An abort request was
received from the other
device.
A timeout occurred in
transmission between
frames.
A timeout occurred in
the FTP service.
An image information file
access error occurred.
An image data file
access error occurred.
An overlay file access
error occurred.
An other type of error
occurred.
Cause
Unable to launch the
DICOM main thread.
The DICOM protocol
settings are invalid.
Unable to launch
DICOM receive main
thread (wait port number
disabled).
Memory was insufficient
during the DICOM
initialization procedure.
FN-PS551 Service Manual Maintenance-20
Maintenance-20
Remedy
Check the other device.
Check the other device.
Restart.
Restart.
Check the other device.
Check the other device.
Check that the
Transmission Time
Between Frames setting at
the other device is the
same as the Timeout
Between Stores setting in
the Protocols menu of the
Service Utility.
Check the status of the
other device, the operation
at the time of transmission,
and the transmitted images.
Check the HDD.
Check the HDD.
Check the HDD.
Restart.
TP4F0016.EPS
Remedy
Restart, and/or check that
the system is installed
correctly.
Reset the DICOM protocol
settings using the Service
Utility.
Change the DICOM
protocol port number using
the Service Utility.
Restart, and/or check that
the system is installed
correctly.
TP4F0017.EPS