Maintenance 8. Software Installation
8.9
Setting the Language for FN-PS551 Application
To change the representative language for the FN-PS551 application to one other than
English (United States) that is a factory default, follow the procedure shown below.
NOTE
If not changing the representative language, skip this section.
Items Required to Set a Representative language for the FN-PS551 Application:
• "Windows NT Workstation for Distribution Only with a New PC"
CD-ROM (For GX1/GX110 series control unit) ....................................... X 1
• "Reinstallation CD" CD-ROM (For GX150 series control unit) ................ X 1
(1)
From the [Start] menu on the Windows NT desktop, click [Settings] and then
[Control Panel].
→ The [Control Panel] window appears.
006-251-06
12.18.2001 FM3271
Maintenance-248
FN-PS551 Service Manual Maintenance-248