Table of Contents
Advertisement
Maintenance 8. Software Installation
(2)
Remove the Disk #1 and insert the "Windows NT Workstation Setup Disk #2"
into the floppy disk drive and press <Enter> key.
→ The setup program starts and the [Welcome to Setup] screen appears about two
minutes later.
(3)
Press <Enter> key to continue the setup procedure.
→ The following screen [Setup automatically detects...] for automatic detection of
mass storage devices such as CD-ROM and HDD appears.
006-251-04
07.24.2000 FM2824
Maintenance-143
FN-PS551 Service Manual Maintenance-143
Advertisement
Chapters
Table of Contents
