Table of Contents
Advertisement
Maintenance 7. Service Utility
For [IPU 35-39]
(1)
From the [Annotation] window, click the [IPU 35-39] tab.
→ The [IPU 35-39] window appears.
(2)
Specify the following parameters.
• [35. 14*17 film character field position & rotation (Default):]:
Enter appropriate numeric values in the following boxes to set positions and
rotation of film character area 0 and 1.
[1417:]: Specify the positions and rotation of area 0 and 1 on a 14"×17"
image in four digits. The default value 0010 means that the positions of
area 0 and 1 are the top left-hand corner/not rotated and the top right-
hand corner/not rotated respectively.
[1714:]: Specify the positions and rotation of area 0 and 1 on a 14"×17"
image (Landscape) in four digits. The default value 1131 means that the
positions of area 0 and 1 are the top right-hand corner/rotated and the
bottom right-hand corner/rotated respectively.
[1843:]: Specify the positions and rotation of area 0 and 1 on a 18 × 43 cm
image in four digits. The default value 0010 means that the positions of
area 0 and 1 are the top left-hand corner/not rotated and the top right-
hand corner/not rotated respectively.
[0810:]: Specify the positions and rotation of area 0 and 1 on a 8"×10"
image in four digits. The default value 0010 means that the positions of
area 0 and 1 are the top left-hand corner/not rotated and the top right-
hand corner/not rotated respectively.
006-251-04
07.24.2000 FM2824
Maintenance-122
FN-PS551 Service Manual Maintenance-122
Advertisement
Chapters
Table of Contents
