Table of Contents
Advertisement
Maintenance 11. Installing Software for GX260 Series Control Unit
(14) Click [Advanced] from the setting items under the [Settings] tab on the [Display
Properties] dialog.
(15) Click [List All Modes] from the setting items under the [Adapter] tab on [Plug
and Play Monitor and Intel(R)82845G/GL Graphics Contr...] dialog.
(16) From the [List of valid modes], select "640 x 480, True Color (32bit), 75Hertz",
then click [OK].
(17) Click [Apply] on the [Plug and Play Monitor and Intel(R) 82845G/GL Graphics
Contr...] dialog.
(18) Click [Yes] on the [Monitor Settings] screen.
NOTE
Above mentioned procedure (18) should be performed within 15 sec. Settings
will be rendered invalid, if the procedure is not performed within the time
limit.
(19) Click [OK] on the [Plug and Play Monitor and Intel(R) 82845G/GL Graphics
Contr...] dialog.
(20) Select "(None)" from the [Screen saver] list under the [Screen Saver] tab on
the [Display Properties] dialog.
(21) Click [OK] on the [Display Properties] dialog, then close the [Appearance
and Themes] window.
006-251-07
10.28.2002 FM3487
Maintenance-290
FN-PS551 Service Manual Maintenance-290
Advertisement
Chapters
Table of Contents
