FujiFilm FN-PS551 Service Manual page 148

Maintenance 7. Service Utility
• [21. Margin:]:
Select an option desired from the drop-down list to display the margin (outer
margin of image trim) in black or transparent.
"Margin depend on image ID (default: Transparent)": Displays a margin in
black or transparent according to image information. If image information
contains no specification for the margin, transparent margin (default) is
selected.
"Margin depend on image ID (default: Black)": Displays a margin in black
or transparent according to image information. If image information
contains no specification for the margin, black margin (default) is selected.
"Transparent Margin (Fix)": Transparent margin is constantly selected.
"Black Margin (Fix)": Black margin is constantly selected.
• [22. Standard Image print 14*17 film like HQ Image:]:
Choose [No] (default) not to enlarge an image to a 14"×17" film size (3543)
for outputting it. Choose [Yes (Magnify)] to enlarge it.
CAUTION
It is necessary to obtain the permission of the Service headquarters before
changing the setting for [22. Standard Image print 14*17 film like HQ Image:].
• [23. 14*17 single character size of 14*17 film:]:
Choose [Standard] (default) to output a 14"×17" image in an equal scaling
on a 14"×17" film (3543) with the standard size film character area 0 or 1.
Choose [Large] to output a 14"×17" image in an equal scaling on a 14"×17"
film (3543) with the large size film character area 0 or 1.
• [24. DR compression in print:]:
Choose [Depending on image information] (default) to perform Dynamic range
compression in reprint according to image information. Choose [Depending
on system setting] to perform Dynamic range compression in reprint according
to system setting.
CAUTION
For [24. DR compression in print:], the default value must be used as
[Depending on system setting] option is disabled (not currently available).
• [25. Print reverse mark:]:
Choose either option for indicating the reverse marks are reversed
horizontally .
[No]: The mark is not displayed.
[Yes (" " or "R-reverse")]: The letter "R" is reversed horizontally if done.
[Yes ("AP" or "PA")]: The letter "AP" or "PA" is indicated according to a
camera or exposure method used (default).
006-251-04
07.24.2000 FM2824
Maintenance-119
FN-PS551 Service Manual Maintenance-119