Table of Contents
Advertisement
Maintenance 8. Software Installation
(4)
Remove the CD-ROM from the CD-ROM drive and check the [Yes, I want to
restart my computer now.] option is selected. Then click [Finish].
NOTE
For DELL OptiPlex GX260 series control unit (Windows XP), do not remove
the CD-ROM with this procedure.
If the CD-ROM is removed, CD-ROM drive error occur. Complete step (5),
and remove the CD-ROM.
→ The system restarts, and the FN-PS551 application starts up automatically.
(5)
Exit from the FN-PS551 application by clicking [Exit] in the [Exit] menu on
the [FN-PS551] window or clicking the close box
corner of the window.
(6)
Insert the "Key Registry" floppy disk (for DICOM, TOSHIBA, IPU or PEM)
into the drive.
(7)
From the [Start] menu on the Windows desktop, click [Run].
→ The [Run] dialog appears.
(8)
Type either "A:DICOM.reg", "A:TOSHIBA.reg", "A:IPU.reg" or
"A:PEM.reg" (depending on which key registry to be installed), then click
[OK].
→ The following procedure shows how to install the DICOM key registry software.
NOTE
For Windows XP, when [OK] is clicked, a message asking whether to add to
the registry is displayed, click [Yes].
006-251-07
10.28.2002 FM3487
Maintenance-246
in the top right-hand
FN-PS551 Service Manual Maintenance-246
Advertisement
Chapters
Table of Contents
